5 Ways Animals Cause Fires and How Wildlife Covers Can Help

Five ways that wildlife can cause fires near power lines. And how Hubbell Power Systems can help protect your equipment.

Wildlife-on-power-linesLooking at recent data from California utilities, about one in ten ignition causes can be traced back to animals either directly or indirectly. That amounts to a significant number of wildfires caused by animal contact alone.

Here are five ways wildlife can cause fires near power lines.

  1. Animals are a potential fire risk.

Animals conduct electricity and are flammable. Dry fur and feathers can be highly flammable in the right situation. If an animal contacts energized equipment, it can ignite and fall onto dry vegetation.

  1. Nesting creates dangerous ignition potential and this is a serious problem for North American utilities.

Nests are composed of organic matter like twigs and grasses. Birds often build nests near energized components. There is a high risk of nests catching fire and dropping to the ground. Effective mitigation strategies depend on the type of nests, the species involved, and the structures the nests are built on. In some cases, wildlife mitigation products can prevent nesting material from contacting energized components. However, this isn’t always an acceptable substitute for removing the nest.

  1. Electrical equipment can explode when contacted by animals.

Close-in faults can cause electrical equipment failures which may result in catastrophic fires. After an explosion, molten metal or flammable insulating oil is often sprayed onto vegetation below, which can cause a wildfire.

  1. Over-voltage can lead to ignition.

If animals contact a distribution transformer, there may be a fuse expulsion on the disconnect protecting the equipment. Damaged insulation or windings may increase the voltage on the secondary side of the transformer. Secondary system equipment damage can also create fault conditions that cause arcing and conductor damage.

  1. Non-fire rated covers may be a source of ignition, since they support combustion.

Even with covers in place, animal contact can occur. If products don’t fit well or aren’t properly applied, equipment is exposed and at risk for contact. If a fault is caused by animal contact, non-fire rated products can ignite themselves and drip flaming material onto vegetation below.

Hubbell Power Systems offers two products for wildlife contact prevention that are V-0 rated and tested to meet specific test criteria of the IEEE 1656 - 2010 Guide.

  • Reliaguard wildlife covers: These guards are install-ready, intended for distribution power lines. Reliaguard has been developed with focus placed on improving retention, ensuring ease of installation and removal, and optimizing adaptability.
  • Greenjacket wildlife covers: These site-specific turnkey solutions intended for substations focus on a precise-fit. Customized guards eliminate contact risk by ensuring complete protection of components. With Greenjacket “no gaps, means no zaps.” Greenjacket solutions come with comprehensive installation instructions to ensure they are applied properly.

In addition to wildlife covers, smart grid sensors can help utilities manage wildfire risks. Learn more by reading our Aclara blog 3 Ways Smart Grid Sensors Mitigate Wildfire Risks. 

Learn More About Wildfire Mitigation



Recommended Posts

Mechanical Chain Hoists

Common Misconceptions of Mechanical Hoists

Continue Reading
Insulated Conductor Support

Live-Line Tools: Insulated Conductor Support Equipment Care & Testing

Continue Reading

Advantages of ArmorGalv® Thermal Zinc Diffusion

Continue Reading
Ï